Taurus-C1 Training
151
Slide 151
Concerning the Tray Heaters (1)
The tray heaters for the main machine are built-in and
connected, but they are switched off before the machine
leaves the factory.
The left switch controls the heaters in the paper trays
(paper bank and LCIT). The right switch controls the ITB
heaters.
Open the top tray to access these switches.
Do not turn on the heaters unless they are needed.
The heaters are recommended for use where the humidity is high.
The heaters prevent condensation in the paper trays, which can lead to double-
feeds and paper jams.
Please explain to the operator that while the heaters can reduce collection of
moisture in the paper trays, they will consume slightly more power.
To Next Page
