Taurus-C1 Training
152
Slide 152
Concerning the Tray Heaters (2)
When these switches are ON, the heaters turn on
when the main machine is turned off (or enters
energy save mode), and then turn off when the
main machine is turned on again (or leaves
energy save mode).
When these switches are OFF, the heaters do not
turn on when the main machine is turned off (or
enters energy save mode).
Both heaters are turned OFF before the machine
leaves the factory.
When these switches are ON and SP5965-1 is set
to "1", the heaters always remain on. Use this
setting only if the work area is extremely humid.
No additional notes
To Next Page
