Taurus-C1 Training
159
Slide 159
Installing the Decurler Unit (3)
You must select the correct entrance guide plate to attach to the
next peripheral downstream from the decurler unit.
This depends on which peripheral is immediately downstream.
Each guide plate is marked to tell you which guide plate to install.
Multi Folding Unit: A
Ring Binder: A
Cover Interposer Tray: A
Finisher (D512 or D513): C
High Capacity Stacker: C
Buffer Pass Unit: No guide plate required
The example below shows guide plate A.
No additional notes
To Next Page
