Taurus-C1 Training
265
Slide 265
Image Position Correction (MUSIC)
When is MUSIC done? (1)
Immediately after the machine is turned on, MUSIC needs
time to complete processing. All jobs must wait until
MUSIC has finished.
Normally, MUSIC is done when one of the following events
occurs:
When the machine initializes, immediately after the
machine is turned on or returns from an energy save mode.
After one of the front doors is opened and closed.
Immediately after process control is done. This feature can
be switched off with SP2153-2.
Just before printing starts. This feature can be switched off
with SP2153-4.
During a long print job. MUSIC will execute after the
number of pages specified with SP2153-24 have been
printed. (This is only done for color printing.)
After the machine returns error SC499. This error indicates
a problem with either the belt speed sensor at the front
edge of the ITB or the ITB drive motor.
After color registration with the User Tools: User Tools>
Maintenance> Color Registration.
If a job is started before the MUSIC process has completed, a message ("Now
Self Checking") will appear on the operation panel display. The job will not start
until after MUSIC adjustment is finished.
To Next Page
