Taurus-C1 Training
280
Slide 280
Overview - Trays 1 and 2
All feed stations use the
FRR feed system.
The arrangement of the
rollers is identical for each
paper tray.
Tray 1
Tray 2
Paper Feed
Motor
Grip
Motor
Vertical Transport
Motor
Bank Exit
Motor
All feed stations use the FRR feed system. The arrangement of the rollers is
identical for each paper tray.
Rotation of the pick-up roller pushes the top sheet of paper to the paper feed
roller and separation roller.
The paper feed rollers and separation rollers feed the paper to the grip rollers.
Grip rollers feed the sheet to transport rollers.
The transport rollers feed the paper through the vertical paper path to the
registration unit.
The vertical paper path starts where paper is fed from Tray 2.
The vertical transport motor (7) rotates the lower transport rollers (8), upper
transport rollers (9), and bank exit rollers (10) to feed paper to the bank exit
rollers (17).
The bank exit motor (17) drives the bank exit rollers (18) and main relay rollers
(19).
The bank exit rollers feed the paper out of the vertical transport unit to the main
relay rollers in the registration unit.
To Next Page
