Taurus-C1 Training
281
Slide 281
Overview - Sensors
[A]: Paper bank (Tray 1, Tray 2)
[B]: Vertical transport unit
[C]: Paper registration unit (in the
right drawer)
The sensors detect the leading
and trailing edges of each sheet.
If a sheet fails to arrive or leave
one of these sensor points within
the correct time for the size of
paper, the sensor will trigger a
paper jam error.
Sensors are located where the
paper path bends: (4) 2nd
transport sensor, (5) vertical
transport sensor, and (12) main
relay sensor.
1. Tray 2 Paper Feed Path
2. 2nd Pickup Sensor
3. 2nd Paper Feed Sensor
4. 2nd Transport Sensor
5. Vertical Transport Sensor
6. Tray 1 Feed Path
7. 1st Pickup Sensor
8. 1st Paper Feed Sensor
9. 1st Transport Sensor
10.Duplex Paper Path
11.Bank Exit/Duplex Junction
12.Bank Exit Sensor
13.Main Relay Sensor
To Next Page
