Taurus-C1 Training
316
Slide 316
Paper Path Motors (Transport and Registration)
Duplex transport motor [1]: Drives duplex transport rollers 5 [2] and duplex
transport rollers 6 [3].
Shift roller unit motor [4]: Moves the shift roller unit [5] to the front or rear to
correct the position of paper in the main scan direction.
Registration gate motor [6]: Operates the registration gate cam that raises and
lowers the registration gate. This motor also raises and lowers the registration
timing idle roller [9] to free the paper for skew correction (this correction is done
by buckling the paper against the registration gate).
Registration timing motor [10]: Drives the registration timing rollers [11].
Bank exit motor [12]: Drives main relay roller [13].
Main relay roller 1 solenoid [14]: Raises main relay roller 1 idle roller [15] briefly
to release the paper in the registration unit for skew correction (buckle
adjustment).
Registration entrance motor [16]: Drives registration entrance roller [17].
Registration entrance solenoid [18]: Raises registration entrance idle roller [19]
briefly to release the paper in the registration unit for skew correction (buckle
adjustment).
The registration entrance motor also drives LCT relay roller [20].
LCT relay roller solenoid [21]: Raises LCT relay roller idle roller [22] briefly to
release the paper in the registration unit for skew correction (buckle adjustment).
Shift idle roller [23]: Drives shift roller [24].
Transfer timing motor [25]: Drives transfer timing rollers [26].
To Next Page
