Taurus-C1 Training
317
Slide 317
Paper Skew Correction (Sub Scan)
Trays 1 and 2, Duplex
When the leading edge of the
paper [1] reaches the
registration timing rollers [2],
the registration timing sensor
[3] detects the leading edge.
Then:
The main relay solenoid 1
[4] lifts the main relay idle
roller [5]
The registration entrance
roller solenoid [6] lifts the
registration entrance idle
roller [7].
This frees the paper.
The leading edge is still at
the registration gate.
This corrects paper skew in the sub scan direction.
The registration gate was raised by the registration gate motor. This mechanism
is explained on a later slide.
To Next Page
