Taurus-C1 Training
80
Slide 80
LCIT (1)
Side fence adjustment
The side fence adjustment mechanism of the LCIT has been re-
designed to make it easier to change paper sizes. The side fences
can be adjusted by loosening the screws and sliding the fences
(see above). The screws do not need to be removed.
No CIS unit
There is no CIS adjustment at installation. The LCIT does not
have a CIS unit for paper registration. Side-to-side registration is
performed once with a CIS in the registration unit of the main
machine.
No additional notes
To Next Page
