101
1. Follow the procedure in "Main Machine Roller Replacement" to remove the
inner tray of Tray 1. This will allow you to see the rollers of Tray 2 and Tray 1.
2. Clean the rollers with a dry cloth.
3. Use the blower blush on the 2nd paper end sensor (1) and 2nd paper feed
sensor (2).
1
2
CEZ231
4. Use the blower brush on the 1st paper end sensor (1) and 1st paper feed
sensor (2).
1
2
CEZ232
5. Push the tray (Tray 1) and bottom tray (Tray 2) back into the machine.
6. Close the left and right front covers.
To Next Page
Loading...
