20
1.10 Resetting the Replaceable Parts Counter
Reset the counter for replaceable parts.
After you have replaced a unit, reset the counter for the unit.
1. Access the Adjustment Settings for Skilled Operators menu.
2. Press [ Next].
3. Press [0305: Reset Replaceable Parts Counter].
4. Press the button of the part that has been replaced.
5. Press [OK].
The counter for the replaced component is reset. The setting for adjusting the
machine for the replaced component is executed automatically.
6. Press [Back].
7. Press [0306: Replaceable Parts Counter].
8. Make sure the counter has been reset.
To Next Page
Loading...
