110
11. On the inside of the right drawer, hold a dry cloth against the registration
entrance drive rollers while turning the knob B3.
CEZ272
12. Use the blower bush on the main relay sensor 3 on the right side of the drawer
above the registration entrance idle rollers cleaned in Step 11.
CEZ271
13. Open the plate on the right top of the drawer so you can see the LCT relay
drive rollers (1) and LCT relay idle rollers (2).
1
2
CEZ275
14. Use a dry cloth on the Idle rollers (2).
15. Turn the knob B3.
To Next Page
Loading...
