40
5. Align the markers at (1) and (2).
1
2
CEZ210
6. Use two black screws to reattach the side plate.
7. Push the bottom tray (Tray 5) back inside the machine.
8. Reattach the tab fence, and then close the wide LCT front cover.
9. Turn on the main machine and wait for the machine to warm up.
10. Access the Adjustment Settings for Skilled Operators menu. (See p.
18
"Resetting the Replaceable Parts Counter".)
11. Reset the replaceable parts counter for the replaced rollers. (See p.20
"Resetting the Replaceable Parts Counter".)
To Next Page
Loading...
