Taurus-C1 Training
57
Slide 57
Cleaning Units: Common Design
 One basic cleaning and lubrication mechanism is used in key
components of the machine.
 A cleaning blade [1], lubricant roller [2], lubricant bar [3], and lubricant
blade [4] are the cleaning mechanisms (with some variation) in the
following units:
 [A] Drum cleaning unit
 [B] ITB cleaning unit
 [C] PTR cleaning unit
 All of these units use a dry lubricant (Zinc Stearate) supplied by a
lubricant bar.
 The fusing unit has a web cleaning mechanism to clean the fusing belt.
There is no oil lubrication system for the fusing belt.
The PTR cleaning unit has a cleaning brush roller [5] instead of a blade [4].
To Next Page
Loading...
