Taurus-C1 Training
62
Slide 62
Image Transfer Unit (2)
 This machine uses the same steering control mechanism as the D016.
 This mechanism checks and corrects the positioning of the ITB to keep it
centered and prevent color offset in images.
 A sensor at the right upper corner [1] of the ITB unit constantly monitors
the position of the ITB.
 If the ITB shifts forward or backward, the steering control motor [2]
(located on the left front of the ITB unit) corrects the position of the belt
with the steering control mechanism [3].
 This system eliminates physical wear on the edge of the belt that would
be caused by an ITB guide fence.
No additional notes
To Next Page
Loading...
