Why does Ricoh Printer show authentication error with space, colon, or quotation mark in username?
If you're encountering an authentication error on your Ricoh printer because the username contains a space, colon (:), or quotation mark ("), recreate the account without these prohibited characters. If the account name was entered incorrectly, re-enter it correctly and log in again.
How to unlock a locked account on Ricoh Printer?
If your Ricoh printer account is locked due to too many failed authentication attempts, ask the user administrator to unlock the account.
What to do if Ricoh Printer failed to obtain URL?
If your Ricoh printer fails to obtain a URL, this could be due to a few reasons: 1. The printer may not be able to connect to the server or establish communication. Ensure the server's settings, like the IP address and host name, are correctly specified on the printer, and that the UA Server's host name is correct. 2. The UA service may not be responding correctly, even if the printer is connected to the server. Ensure the UA service is correctly specified. 3. SSL may not be correctly specified on the server. Specify SSL using Authentication Manager. 4. Server authentication may have failed. Ensure server authentication is correctly specified on the printer.
How to fix 'You do not have the privileges to use this function' on Ricoh Printer?
If you see this message when trying to use a function on your Ricoh printer, it means the function is not authorized in the Address Book Management settings. Contact your user administrator to authorize the function. If this appears when specifying a default setting, the administrator responsible must decide whether to authorize use of the function.
Why does authentication fail on my Ricoh Printer?
Authentication can fail on your Ricoh Printer for several reasons: * The login user name or password may be incorrect. Contact your user administrator to verify your login credentials. * The maximum number of registered users may have been reached. Try deleting unnecessary user addresses. * There may be a network or server error when using Windows Authentication, LDAP Authentication, or Integration Server Authentication. Check the network with your LAN administrator.
How to fix streaks on prints from Ricoh All in One Printer?
To address streaks on prints from your Ricoh All in One Printer, go to the [Adjustment] menu and carry out SP 3-820-002 (Execute Density Adj). This issue may be caused by inconsistent electrical discharge from the charge corona unit.
How to remove white lines or drag marks from Ricoh All in One Printer prints?
White lines or drag marks on prints from your Ricoh All in One Printer may indicate dirt or oil on the drum unit. In the [Adjustment] menu, apply 2-810-001 (Clear blurred img). Also enable 3-309-010 (Oil removal mode). You can also try applying 2-810-001 (Clear blurred img) again.
Power| power requirements | 240V, 24A |
|---|---|
| maximum power consumption | Less than 5, 500W |
Printing Specifications| maximum print resolution | 1200 dpi |
|---|---|
| output speed | 90 pages-per-minute |
| warm-up time | Less than 420 seconds |
Media Capacity and Size| maximum input capacity | 11, 000 sheets |
|---|---|
| maximum output capacity | 13, 000 sheets |
| media size (standard input trays) | 8.5" x 11" to 13" x 18" |
Media Weight| media weight (tray 1) | 16 lb. Bond – 80 lb. Cover |
|---|---|
| media weight (tray 2) | 16 lb. Bond – 80 lb. Cover |
| media weight (RT5020 tray) | 16 lb. Bond – 110 lb. Cover |
EFI Fiery Print Controller| cpu | Intel Core Duo 2.16 GHz |
|---|---|
| memory | 2 GB |
| hard disk drive | 500 GB (250 GB x 2) |
Weight and Dimensions| dimensions | 49.2" x 43.3" x 56.7" |
|---|---|
| weight | 1, 543.2 lbs. (700 kg) |
To Next Page
