Ricoh Pro C9210 User Manual (English)

Other manuals for Ricoh Pro C9210

Operator's Guide292 pages

Operating Instructions160 pages

Questions and Answers:

S
Steven PattersonSep 15, 2025
What to do if Please wait message appears on Ricoh Pro C9210 when the machine is warming up?
- B
  Bethany FerrellSep 16, 2025
  Wait until the message disappears. Do not turn off the power while the message is showing. If the machine is not ready in 10 minutes, turn off the power and make sure the main power indicator turns off. Wait at least 20 seconds, and then turn on the power again. If the machine is still not ready in 10 minutes, contact your service representative.
M
Michelle PierceAug 25, 2025
Why does my Ricoh Pro C9210 Printer misfeed frequently?
- T
  Timothy SanchezAug 25, 2025
  Frequent misfeeds in your Ricoh Printer could be due to several reasons. One reason is using curled paper. Flatten the paper or load it upside down so the curled edges face downward. Another reason could be improperly set tray side or end fences. Ensure the side and end fences are correctly set and locked. Also, check for any foreign objects on the output tray and remove them.
C
Colin DelacruzAug 25, 2025
What to do if nothing happens when pressing Check Status key on Ricoh Printer?
- S
  Samuel WilsonAug 26, 2025
  If nothing happens when you press the [Check Status] key on your Ricoh Printer, the power may be turned off. Make sure the main power indicator is off, and then turn on the power.
C
ccampbellAug 26, 2025
How to prevent misfeeds when printing envelopes on Ricoh Pro C9210?
- D
  Dawn HopkinsAug 27, 2025
  To prevent misfeeds when printing envelopes on your Ricoh Printer, make sure you fully flatten curled envelopes before you load them. Do not stack envelopes over the specified limit for the paper tray. If misfeeds still occur after the envelopes have been flattened, load envelopes on the tray one at a time and print them individually.
P
Patricia StricklandSep 16, 2025
What does Shutting down... Please wait message mean on Ricoh Pro C9210?
- D
  Diamond CarneySep 17, 2025
  Follow the message that appears and wait until the machine has shut down. Do not turn on the power while this message is displayed. If the power has been turned on, follow the message that appears. The shutdown time varies according to the options that are installed and the environmental conditions of the location where the machine is set up. If the main power indicator remains lit after 15 minutes have elapsed, contact your service representative.
J
Jessica MolinaSep 10, 2025
Why output paper to the stacker tray does not align properly on Ricoh Printer when the paper weight is 280.0 g/m2 or more?
- W
  williamdorseySep 10, 2025
  Select [ Curl Correction Level: Small], [ Curl Correction Level: Medium] or [ Curl Correction Level: Large] under [Correct Output Paper Curl] in "Adjustment Settings for Operators".
M
Max CardenasSep 8, 2025
What to do if an error occurred when changing the Address Book on Ricoh Printer?
- C
  Cindy YoungSep 8, 2025
  If an error has occurred when the Address Book is changed from the display panel or Web Image Monitor on your Ricoh Printer, it may be because the Address Book cannot be changed while you delete the multiple stored documents. Wait a while, and then retry the operation.
S
Steven MilesSep 9, 2025
Why does the output paper to the stacker tray not align properly on Ricoh Printer?
- S
  Sara AcostaSep 9, 2025
  When the paper is curled downward, select [ Curl Correction Level: Small], [ Curl Correction Level: Medium] or [ Curl Correction Level: Large] under [Correct Output Paper Curl] in "Adjustment Settings for Operators". When the paper is curled upward, select [ Curl Correction Level: Small], [ Curl Correction Level: Medium] or [ Curl Correction Level: Large] under [Correct Output Paper Curl] in "Adjustment Settings for Operators".
J
julia15Sep 2, 2025
What to do if Ricoh Pro C9210 error message persists after closing the cover?
- S
  Scott PachecoSep 2, 2025
  If an error message persists on your Ricoh Printer even after closing the indicated cover, one or more covers that are not indicated may still be open. Close all the covers of the machine.
D
Daniel ParkAug 31, 2025
What to do if an error has occurred on Ricoh Pro C9210 Printer?
- M
  Mark HenrySep 1, 2025
  If an error has occurred on your Ricoh Printer, and an item with the status "Error Occurred" is displayed on the [Check Status] screen, press [Check], read the displayed message, and then take the appropriate action.

Ricoh Pro C9210 Specifications

General

Print Technology	Laser
Maximum Print Resolution	1200 x 4800 dpi
Monthly Duty Cycle	1, 500, 000 pages
Dimensions (W x D x H)	1, 020 x 1, 024 x 1, 195 mm
Weight	1, 050 kg
Print Resolution	1200 x 4800 dpi
Operating System Compatibility	Windows, macOS, Linux
Network Connectivity	Ethernet, Wi-Fi
Connectivity	USB, Ethernet
Paper Weight	52-300 gsm
Maximum Paper Size	330 x 487.7 mm
Duplex Printing	Standard
Supported Media Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive
Supported Media Types	Plain, Coated
Warm-up Time	Less than 15 seconds
First Print Out Time	Less than 5.5 seconds
Print Speed (A4)	Simplex: 115 ppm (colour), 135 ppm (black & white) Duplex: 115 ppm (colour), 135 ppm (black & white)
Print Speed	Simplex: 115 ppm (colour), 135 ppm (black & white) Duplex: 115 ppm (colour), 135 ppm (black & white)
Paper Capacity	Standard: 3, 300 sheets Maximum: 16, 200 sheets