Ricoh Ri 100 - Cleaning the Maintenance Unit

4
If a message prompting you to provide regular maintenance
appears, clean the Maintenance Unit.
Pressthe[▼/Menu]key.
Pressthe[▲]or[▼/Menu]keytodisplay[Mainte-
nance],andthenpressthe[#Enter]key.
Pressthe[▲]or[▼/Menu]keytodisplay[CleanMaint
Unit],andthenpressthe[#Enter]key.
When "Press # to clean Maint Unit" is displayed,
pressthe[#Enter]key.
When "Open Top Cover to clean unit" is displayed,
open the top cover.
The Maintenance Unit will move to a position where you can clean it.
Do not touch the toothed rubber belt or ink tubes when cleaning the Main-
•
tenance Unit. Also, take care not to catch cables or ink tubes with your
sleeves.
Cleaning the Maintenance Unit