Ricoh Ri 100 - Cleaning the Print Head Nozzles

7
Do not put your hands inside the machine while cleaning of the •
print head nozzles is automatically performed. Your fingers may
be trapped and injured inside the machine.
If the message prompting you to provide regular maintenance
appears, clean the print head.
Attach the two absorbents to the cleaning tool, and
then use the dropper to moisten the absorbent with
the cleaning liquid.
Use the dropper to suck cleaning liquid up to the scale 2 on the dropper. Use half
of this for each absorbent swab.
Be sure to moisten the absorbent with the cleaning liquid until the absorbent is
completely wet.
DSB432
Absorbent
Cleaning Tool
Pressthe[▼/Menu]key.
Pressthe[▲]or[▼/Menu]keytodisplay[Maintenance],
andthenpressthe[#Enter]key.
Pressthe[▲]or[▼/Menu]keytodisplay[AutoHead
Maint.],andthenpressthe[#Enter]key.
The print heads will move to a position where you can clean it.
CleaningthePrintHeadNozzles