Ricoh Ri 1000 User Manual

RICOH Ri 1000
User Manual
18
5. Insert ink cartridges
❖ Please note, each cartridge is designed for its corresponding slot. WH1 will go
in the first slot (closest to the control panel) then WH2 then Black, Cyan,
Magenta, and lastly Yellow towards the back of the printer
6. To power on, after flipping the I/O switch to | (on I ), hold down the power button on the front
near the LCD screen, for 3 seconds
.
❖ To power off, hold down the power button on the front near the LCD screen, for more
than 3 seconds and return the I/O switch to O (off)
7. The printer is starting to boot.
8. After booting, the printer will perform initial charging if the printer is not charged.
❖ Initial charging takes about 15-20 minutes and the display will show a status
percentage (%)
Warning
During the initial ink charging, don’t open front cover or cartridge cover.
9. Once the initial charge is completed, the printer will show READY in the upper left-hand corner
of the LCD screen

Ricoh Ri 1000 Specifications

General

Print Technology	Inkjet
Print Resolution	1200 x 1200 dpi
Power Requirements	AC 100-240V, 50/60Hz
Memory	2 GB
Ink Type	Pigment Ink
Ink Colors	CMYK
Connectivity	USB
Operating System Support	Windows
Supported Media Types	Cotton, Polyester