Ricoh Ri 1000 - Table Height Adjustment

RICOH Ri 1000
User Manual
93
7.1 Adjusting Head
- This function adjusts the print head alignment position. When the print result is not clear (for ex
ample, vertical lines are misaligned, or color is not clear. Print is fuzy) this adjustment may impro
ve the result. NOTE: Always check the table height 1
st
. The reading on the dial should be close 0 i
n most cases. If the printing surface is too far away from the head the prints will be fuzzy and the
lines may not appear straight
• Press the button, the pattern of adjusting head is printed.
• After find an appropriate adjustment value form the print result of adjustment pattern.