Ricoh Ri 1000 - Page 94

RICOH Ri 1000
User Manual
94
• Find a pattern with a square in the lightest color and vertical lines on both sides (or closest to this
condition) aligned in row A
• Note the value indicated over the pattern indicates an appropriate adjustment value.
• An appropriate adjustment value is “+2”. In this example
• Enter this value in the box for ROW A (up arrows make the value go up, down arrows make the value
go down
• Repeat this for the other rows in the test pattern (B, C, etc)
• When there are no straight vertical side lines, like upper illustration, check the last square out of the
sequence of squares with the smallest gap in side lines and find a corresponding value.
• As upper illustration, the value is “+4”.
After you have entered a value for all the rows, press the ALIGN button which sets the new values.
Reprint the pattern and repeat the above process
Repeat the process until all rows (A,B,C etc. ) show the 0 column or close to the 0 column shown as the b
est value
You can always reset to the original settings by entering the factory reset button by going to the settings
tab and select OPTION