Ricoh SP 112 - User Manual

Other manuals for Ricoh SP 112

Specifications2 pages

Questions and Answers

S
sonia92Aug 19, 2025
What to do if Ricoh SP 112 All in One Printer paper jams occur frequently?
- A
  Austin LamAug 19, 2025
  If paper jams occur frequently in your Ricoh All in One Printer, make sure there are no gaps between the paper and the paper guides by adjusting them. Also, avoid printing on both sides of the paper when printing images that contain large areas of solid color, which consume a lot of toner. Use supported types of paper and load paper only as high as the upper limit markings on the paper guide.
B
Brandon MyersAug 21, 2025
Why does Ricoh All in One Printer feed multiple sheets of paper?
- B
  blairrobinAug 22, 2025
  If your Ricoh All in One Printer is feeding multiple sheets of paper at once, fan the paper well before loading it, and ensure the edges are even by tapping the stack on a flat surface. Also, make sure that the paper guides are in the right position. Use supported types of paper and load paper only as high as the upper limit markings on the paper guide. Check that paper was not added while there was still some left in the tray; only add paper when the tray is empty.
C
cynthia61Aug 23, 2025
What to do if Ricoh All in One Printer shows Out of Paper / Misfeed?
- J
  Jacob GriffinAug 25, 2025
  If your Ricoh All in One Printer displays an 'Out of Paper' or 'Misfeed' error, load paper in the input tray.
R
rodriguezamandaAug 26, 2025
How to fix Ricoh All in One Printer paper not feeding smoothly?
- D
  Debra ContrerasAug 26, 2025
  To ensure paper feeds smoothly in your Ricoh All in One Printer, use supported types of paper. Load paper correctly, making sure that the paper guides are properly adjusted. If the paper is curled, straighten it. Take the paper out of the tray and fan it well. Then, reverse the top and bottom of the paper, and put it in the tray.
B
Benjamin SimsAug 28, 2025
Why is my Ricoh SP 112 printout blurred?
- A
  Amy PerezAug 28, 2025
  If the whole printout from your Ricoh All in One Printer is blurred, the paper may be damp, so use paper that has been stored properly. Also, printing is generally less dense if you enable [Toner Save:]. Condensation may have collected. If rapid change in temperature or humidity occurs, use this machine only after it has acclimatized.
J
Joel CraneAug 30, 2025
How to fix Ricoh SP 112 that does not turn on?
- T
  Tonya LesterAug 30, 2025
  If your Ricoh All in One Printer doesn't turn on, ensure the power cord is firmly plugged into the wall outlet and that the outlet is working by testing it with another device. The problem might be that the power cord is not connected properly.
D
David AlexanderSep 1, 2025
What to do if paper size setting does not match the paper loaded in Ricoh All in One Printer?
- A
  anthony57Sep 1, 2025
  If the paper size setting does not match the paper loaded in your Ricoh All in One Printer, check whether the paper size specified on the machine matches that of the loaded paper.
C
Chase GriffithSep 2, 2025
How to prevent paper wrinkles in Ricoh SP 112?
- J
  Jose StoneSep 2, 2025
  To prevent paper wrinkles in your Ricoh All in One Printer, use paper that has been stored properly, as damp paper can cause wrinkles. Ensure that the paper isn't too thin. If there are gaps between the paper and the paper guides, adjust the paper guides to remove the gaps.
L
Larry DixonSep 4, 2025
Why is the paper curled after printing with Ricoh All in One Printer?
- C
  Connor RodriguezSep 5, 2025
  If the paper is curled after printing with your Ricoh All in One Printer, try loading the paper upside down in the paper tray. The paper may also be damp, so use paper that has been stored properly.
Z
Zachary FosterSep 7, 2025
Why are images printed diagonally on Ricoh SP 112?
- M
  Maria BrownSep 7, 2025
  If images are printed diagonally on pages from your Ricoh All in One Printer, adjust the paper guides to remove any gaps between the paper and the guides.

Summary

Model-Specific Information

Important Safety Instructions Region A

User Information on Electrical & Electronic Equipment

Information on handling electrical and electronic equipment for recycling.

Environmental Advice for Users

Advice on environmental impact and disposal for users.

Note for the Battery and;or Accumulator Symbol (For EU countries only)

Explanation of the battery symbol for EU users.

Important Safety Instructions Region B

Notes to Users in the State of California

Specific notes for users in California regarding perchlorate material.

Guide to the Machine

Machine Components Overview

Description of external and internal machine parts and their functions.

Driver and Software Installation

Instructions for installing, upgrading, or deleting printer drivers and software.

Smart Organizing Monitor Utility

Explanation of the Smart Organizing Monitor utility and its functions.

Loading Paper

Supported Paper

List of paper types and sizes supported by the machine.

Print Area

Diagram showing the printable area on the paper.

Non-Recommended Paper Types

Types of paper that should not be used with the machine.

Loading Paper

Step-by-step instructions for loading paper into the tray.

Specifying Paper Type and Paper Size Using Smart Organizing Monitor

How to set paper type and size via the Smart Organizing Monitor.

Printing Documents

Basic Operation

Fundamental steps for printing documents from a computer.

Printing on Both Sides of Sheets

Guide to enabling and using duplex printing for saving paper.

Canceling a Print Job

Methods for canceling print jobs from the control panel or computer.

Handling Paper Mismatches

Procedures for resolving paper size/type mismatches and prevention.

Configuring the Machine Using Smart Organizing Monitor

Printing Configuration and Test Pages

Procedures for printing diagnostic pages for the machine.

Checking System and Status Information

Viewing machine status, paper settings, and toner levels.

Modifying Machine Settings

How to adjust machine settings like paper size and energy saver mode.

Updating the Firmware

Steps to download and install firmware updates for the machine.

Maintaining the Machine

Replacing the Print Cartridge

Step-by-step guide for replacing the printer's toner cartridge.

Cautions When Cleaning

Important safety precautions to follow during machine cleaning.

Cleaning the Inside of the Machine

Detailed instructions for cleaning the internal components of the machine.

Troubleshooting

Common Problems

Solutions for frequently encountered issues like the machine not turning on or pages not printing.

Paper Feed and Jam Issues

Troubleshooting for paper not feeding, jams, and multiple sheets feeding.

Removing Printing Jams

Instructions for safely removing jammed paper from the machine.

Print Quality Issues

Diagnosing and fixing problems affecting print quality, including machine condition.

Printer Operational Problems

Resolving errors, job cancellations, delays, and print alignment issues.

Smart Organizing Monitor Error Messages

Explanations and solutions for error and status messages displayed by the monitor.

Appendix

Notes About the Toner

Information and considerations regarding the use of toner.

Moving and Transporting the Machine

Cautions to follow when moving or transporting the machine.

Disposal

Guidance on the proper disposal of the machine.

Where to Inquire

Contact information for further support and inquiries.

Consumables

Print Cartridge

Details about the print cartridge, including average printable pages.

Specifications of the Machine

General Function Specifications

Overview of general machine specifications like configuration and print process.

Power Requirements

Power specifications for different regions (Europe, Asia, North America).

Machine Dimensions and Weight

Physical dimensions and weight of the machine.

Printer Function Specifications

Specifications related to printing speed, resolution, and interface.

Trademarks

Ricoh SP 112 Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 600 DPI
Duplex printing mode	Manual
Time to first page (black, normal)	13 s
Print speed (black, normal quality, A4/US Letter)	16 ppm
Maximum duty cycle	10000 pages per month
Number of print cartridges	1
Page description languages	GDI
Total input capacity	50 sheets
Total output capacity	10 sheets
Paper tray media types	Plain paper, Recycled paper, Thick paper, Thin paper
Paper tray media weight	60 - 105 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Mobile printing technologies	Not supported
Standard interfaces	USB 1.1, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Internal memory	16 MB
Maximum internal memory	- MB
Product color	Black, White
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	300 W
Power consumption (standby)	60 W
Power consumption (printing)	- W
Power consumption (PowerSave)	5 W
Sustainability certificates	ENERGY STAR
Server operating systems supported	Windows Server 2003, Windows Server 2008, Windows Server 2012
Windows operating systems supported	Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Cables included	AC