Problem Solution
The printed paper does not stack
neatly.
• The machine cannot detect the paper that is on the output
tray, so make sure that the stack of paper that is output
does not exceed the capacity of the output tray.
• Are you printing on different sizes or types of paper? If
you are printing on different sizes or types of paper,
remove the printed pages from the output tray as they are
output.
• If you are printing a combination of both single-sided
and two-sided documents, remove the printed pages
from the output tray more frequently.
Images are not printed in the right
position
Adjust the front end fence and both side fences to match the
paper size.
See page 26 "Loading Paper".
Images are printed diagonally to the
pages.
If there are gaps between the paper and the side or end
fences of the paper tray, or the paper guides of the bypass
tray, adjust the side or end fences of the paper tray, or the
paper guides of the bypass tray to remove the gaps.
Paper Feed Problems
161
To Next Page
Loading...
Need help?
General
Weight and Dimensions
