Ridder RLD - Maintenance RRD800 Rack Drives

Technical information
Maintenance
2
Ridder Drive Systems B.V. T +31 (0)341 416 854 I ridder.com E info@ridder.com
10
Maintenance RRD800 rack drives
Inspection and maintenance work is only permitted to approved personnel.
Installation RRD800
After installation the RRD800 rack-drive and rack (teeth, sides, bottom) have to be lubricated! Refer to
"Lubricate RRD800".
Maintenance RRD800
Every 6 months inspection of system and rack drives on technical state (wear and tear, shaft
connections, fasteners and such) and proper functioning. With this the RRD800 rack-drive and rack
(teeth, sides, bottom) have to be lubricated. Refer to "Lubricate RRD800".
Lubricate RRD800
● Lubricate pinion-house unit with grease gun (approximately 5 strokes per grease nipple).
● Lubricate rack (all around) with brush (teeth, sides, bottom).
Lubricant RRD800
Grease: CASTROL OPTILEB-GR 823-2 (item number: 182029)