For the most up to date documents, bike models, additional information, instructional videos,
And more visit us at Ride1UP.com
2. What’s in the Box?
The Revv 1 will arrive fully wrapped with foam and cardboard and include the following in our Accessory
Box:
Accessory Box:
• User Manual
• Ride1Up Gift
• Battery Charger
• (2) Keys
• Ride1Up Allen Wrench Set
• (2) 13/15 Double Wrenches
• 8/10 Double Wrench
• (2) Pedals – R & L
• 12mm M5 Screws
• 34 mm M6 Screw
3. Installation Steps: Assembling Your Bike
Please scan QR Code below for Revv 1 Assembly Video.
3.1 Headset Assembly
PLEASE COMPLETE STEPS IN ORDER.
§ Remove the stem faceplate on the headset by loosening the four screws using a 4mm allen wrench.
§ Place the handlebars onto the stem and secure it in place by screwing back on the faceplate.
§ Tighten the 4 screws in an “X” pattern to ensure tightness is distributed evenly.
§ Place the two turn signals near each side of the headlight and secure them by screwing and
tightening the nuts.
§ Insert the two turn signals and tighten with attached bolts.
To Next Page
Loading...
