For the most up to date documents, bike models, additional information, instructional videos,
And more visit us at Ride1UP.com
9. Error Code Troubleshooting:
In the event of a problem with the electrical components of your bike, the display will show an error code.
The error code may only appear briefly when the problem occurs. If an error occurs and you can do so safely,
glance at your screen to see if an error code is present. Compare the code with this list below and how to
resolve:
9.1 Error Codes/Source of the Error:
Display is in normal condition
The throttle is not homing (staying in the hing position)
Battery is under voltage protection
The hall sensor is broken
The motor phase is broken
The controller temperature is high enough to reach the protection point
The motor temperature is high enough to reach the protection point
The current sensor is broken
To Next Page
Loading...
