What to do if the Ground Fault Circuit Interrupter trips on my RIDGID Cleaning Equipment?
If the Ground Fault Circuit Interrupter trips when the machine is plugged in or when the foot pedal is depressed, it may be due to a faulty Ground Fault Circuit Interrupter. Replace the cord set, which includes a Ground Fault Circuit Interrupter.
Why is my RIDGID Cleaning Equipment motor turning but the drum is not?
If the motor is turning, but the drum isn't, the belt may not be properly installed on the drum or pulley. To resolve this, re-install the belt.
How to prevent cable kinking or breaking in RIDGID Cleaning Equipment?
Cable kinking or breaking can occur if the cable is being forced. To prevent this, do not force the cable. Let the cutter do the work.
Why does my RIDGID Cleaning Equipment drum turn in only one direction?
If the drum turns in only one direction, the motor may be switched to reverse. Use reverse only if the cable gets caught in the pipe.
General| Model | K-400 |
|---|---|
| Category | Cleaning Equipment |
| Type | Drum Machine |
| Power Source | Electric |
| Cable Diameter | 3/8", 1/2" |
| Pipe Size | 1-1/2 in to 4 in (38 mm to 102 mm) |
| Voltage | 115V |
| Drum Capacity | 100 ft of 3/8 inch or 75 ft of 1/2 inch cable |
| Motor | 1/3 HP induction motor |
Explains the meaning of safety symbols used in the manual and on the product.
Provides essential safety rules for operating power tools, covering work area, electrical, and personal safety.
Details safety precautions specific to the drain cleaning machine operation.
Outlines the machine's capabilities, features, and technical specifications for the K-400 model.
Lists the items included as standard with the K-400 Drain Cleaning Machine.
Step-by-step guide for attaching the wheels to the drain cleaning machine.
Instructions for installing the optional AUTOFEED system onto the machine.
Guide for connecting the optional front guide hose to the AUTOFEED.
Inspecting gloves, power cord, GFCI, and other safety related components before use.
Verifying the proper assembly, condition, and functionality of all machine parts and controls.
Ensuring adequate lighting, identifying hazards, and securing a stable work environment.
Assessing the drain's condition, access points, and removing any fixtures for clear access.
Correctly placing the machine relative to the drain and choosing the appropriate cutting tool.
Guide for inserting cable, including manual/AUTOFEED and passing through traps.
Techniques for cleaning the drain, working through blockages, and managing cable.
Steps for handling stuck tools and safely retrieving the cable from the drain.
Specific operational guidance for using the optional front guide hose attachment.
Covers cleaning the unit, cables, AUTOFEED, lubrication, and guide hose.
Steps for removing and installing the drive belt, including safety precautions.
Explains how to adjust the torque limiter to prevent cable damage from over-torque.
Detailed instructions on how to remove an old cable and install a new one on the drum.
Lists and describes optional accessories available for the K-400 Drain Cleaning Machine.
Guidelines for storing the drain cleaning machine safely and properly.
Information on obtaining service and repair for the drain cleaning machine.
Guidance on the proper disposal of the machine and its components.
Common problems, their possible causes, and solutions for the K-400 Drain Cleaning Machine.
To Next Page
