To Next PageTo Next Page
Need help?Do you have a question about the RIDGID MS1250LZ and is the answer not in the manual?
Provides an overview of the tool's features, safety, performance, and dependability.
Lists general safety precautions to prevent injury and ensure safe operation of the tool.
Specific safety rules and guidelines for operating the compound miter saw.
Explains various symbols used on the tool and in the manual for better and safer operation.
Explains signal words (DANGER, WARNING, CAUTION) and how to obtain service.
Covers double insulation concept, electrical connection requirements, and power supply.
Provides guidance on selecting and using appropriate extension cords for the tool.
Defines technical terms and operations related to the compound miter saw for clarity.
Lists technical specifications like blade diameter, speed, input power, and net weight.
Describes key parts like motor, blade, handles, locks, and storage for safe and efficient use.
Details laser guide, angle stops, bevel adjustments, fence, and tools needed.
Lists and illustrates the included loose parts that come with the miter saw.
Procedures for unpacking, workbench mounting, and leg stand assembly.
Guide for installing accessories like clamps, dust systems, and the saw blade.
Instructions for mounting the laser guide and aligning the cutting line.
Steps for slotting the throat plate and squaring the blade to the fence and table.
Important safety warnings and intended uses for the compound miter saw.
Step-by-step instructions for performing crosscuts, bevel cuts, and compound miter cuts.
Guidance on cutting crown molding, using jigs, and handling warped materials.
Covers general maintenance, extension cord use, and brush replacement.
Procedure for safely replacing batteries in the Exactline™ laser guide.
Details the limited warranty, exclusions, and how to obtain service for the tool.
Provides contact information for parts, service, and online resources for the miter saw.
General
