To Next PageTo Next Page
Need help?Do you have a question about the RIDGID MS1290LZ1 and is the answer not in the manual?
Covers reading instructions, electrical safety, tool maintenance, and proper attire.
Focuses on keeping the area clean, securing the tool, and avoiding hazards.
Focuses on safely clamping workpieces and ensuring adequate blade clearance.
Covers safe cutting practices, tool handling, and awareness of potential hazards.
Addresses laser safety, dust hazards, and safe tool transport procedures.
Explains symbols for voltage, current, power, speed, and time units.
Covers symbols for safety alerts, personal protection, and operational warnings.
Defines signal words (Danger, Warning, Caution) and provides safety alert information.
Explains the concept of double insulation for electrical safety.
Provides chart and advice for selecting and using appropriate extension cords.
Details key specifications like blade size, motor input, and cutting capacities.
Covers components like motor, guards, handles, depth control, and miter/bevel locks.
Describes laser guide, slide bar, fences, spindle lock, and Repeat-A-Cut™ system.
Instructions for safely removing the saw from its packaging and checking for damage.
Details how to securely mount the saw to a workbench or stand.
Explains how to lock/unlock the saw arm and use the depth guide for specific cuts.
Provides instructions for attaching the dust collection bag and the workpiece clamp.
Step-by-step guide for safely removing and installing saw blades.
Instructions for installing the laser guide and aligning its cutting line.
Guides on replacing the throat plate and centering the blade on slide bars.
Details on adjusting the miter lock lever and squaring the blade to the fence.
Procedures for ensuring the saw blade is square to the miter table.
Instructions for adjusting the bevel lock lever, bevel pivot, and travel pivot.
Procedures for squaring the blade to the miter table and resetting scale indicators.
Lists the types of materials and cuts the saw is designed for.
Specific safety and operational advice for using the sliding feature.
Step-by-step instructions for making cuts using the saw's sliding mechanism.
Guides on performing standard cuts without the slide feature and miter/cross cuts.
Detailed instructions for setting up and executing bevel cuts.
Step-by-step guide for making cuts with both miter and bevel angles.
Advice on providing support for long workpieces and clamping wide ones.
Instructions for making dado cuts and attaching/using an auxiliary fence.
A chart providing angle settings for various compound miter cuts.
Techniques and angle settings for accurately cutting crown molding.
Instructions for using a support jig for cutting crown molding.
Guidance on positioning warped material to avoid kickback and blade pinching.
Procedures for replacing motor brushes and checking/adjusting belt tension.
Instructions for replacing the batteries in the Exactline™ laser guide.
Specifies defects in workmanship or materials covered by the 3-year warranty.
Outlines the process for obtaining warranty service and repairs.
Lists items and conditions not covered by the limited warranty.
Explains implied warranties, disclaimers, and legal rights.
General
