Need help?Do you have a question about the RIDGID MS1060 and is the answer not in the manual?
General| Voltage | 120 V |
|---|---|
| Cord Length | 6 ft |
| Motor Power | 15 Amp |
| Bevel Capacity | 48° left and right |
| Amperage | 15 Amp |
| Motor | 15 Amp |
Read manual, know applications, limitations, and potential hazards for safe operation.
Inspect saw, check blade rotation, tighten screws, inspect for damaged parts before use.
Use double insulated tools, avoid plug contact, unplug for servicing, use in dry areas.
Use saw in well-lit, dry areas; mount securely on a level surface to prevent movement.
Use correct accessories/blades, keep area clean, ensure proper setup and alignment.
Wear safety gear, proper attire, secure workpiece, avoid overreaching or freehand cutting.
Stay alert, keep bystanders away, ensure cut-off piece mobility, don't force tool, free jams safely.
Keep hands clear of blade, hold workpiece firmly, use dry runs, avoid short pieces.
Learn to perform miter, bevel, and compound cuts using correct settings.
Safely cut bowed material; use caution with aluminum/non-ferrous metals.
Support long pieces; use auxiliary fence for added support during cuts.
Care for carbide blades, replace worn brushes, ensure lower blade guard is functional.
Address blade alignment, movement issues, binding, vibration, and guard problems.
Diagnose issues like motor not starting or brake not stopping blade.
Use diagrams and part lists to identify components for repair or replacement.
Understand warranty coverage, exclusions, and how to obtain service.
Contact RIDGID for questions, comments, or warranty service using provided contact info.
To Next Page
