To Next PageTo Next Page
Need help?Do you have a question about the RIDGID R8606 and is the answer not in the manual?
General| Type | Random Orbit Sander |
|---|---|
| Voltage | 120V |
| Weight | 3.5 lbs |
| Dust Collection | Yes |
| Sander Type | Random Orbit |
| Power Source | Corded |
| Orbit Diameter | 3/32 inches |
| Sanding Speed (OPM) | 12, 000 OPM |
Keep the work area clean and well lit to prevent accidents.
Proper grounding, cord care, and avoiding wet conditions to prevent shock.
Stay alert, use PPE, and avoid distractions for safe operation.
Proper tool usage, maintenance, and handling to ensure safety and longevity.
Use specified chargers and keep batteries away from metal objects.
Wear safety gear, protect lungs and hearing, and be aware of battery tool hazards.
Avoid crushing, dropping, or exposing batteries to extreme heat or ignition sources.
Explains DANGER, WARNING, CAUTION, and NOTICE to identify risk levels.
Defines symbols like Safety Alert, Read Manual, Eye Protection, and Recycling.
Details on disc diameter, orbit diameter, and no-load speed.
Do not use if not fully assembled or if parts are missing/damaged.
Intended uses for sanding wood, steel, and removing rust.
Steps for correctly inserting and removing the battery pack.
Instructions for activating and deactivating the tool.
Guidance on choosing sandpaper grit for different sanding tasks.
Procedures for attaching hook-and-loop and PSA sanding discs.
How to attach a vacuum hose for dust extraction.
Techniques for moving the sander over the workpiece for optimal results.
Using the dial to adjust the sander's speed.
Procedures for emptying and cleaning the dust bag for efficiency and safety.
Tips for cleaning plastic parts and avoiding damage from solvents.
Contact information for authorized service centers and ordering parts.
Locating model and serial numbers for service requests.
