24
454107.66.01-02_GB
01.07.2015
Translation of the Original
The visual inspection comprises the following:
Checking the intactness of the joints seals in the refrigeration circuit (pipe joints at the
compressor) (red seals)
Visual inspection of the refrigeration circuit for oil leaks in the area of the compressor and
condenser connecting lines (suction line, pressure line)
Inspection of the condenser heat exchanger surface and the refrigerant piping for corrosion
damage
Inspection of the mounting and attachment of all piping and components for security
Check that operating manual is available at the process cooler
All inspections and tests must be documented in the system logbook.
8. Regular Inspection and Tests
9. Malfunctions / Troubleshooting
ENGLISH
9. MALFUNCTIONS / TROUBLESHOOTING
The safety notices contained in Chapter 1 must be complied with !
The basis for troubleshooting is the circuit diagram, the flow diagram and the messages
displayed by the Siemens Software on the CT central computer.
Alarms and Errors Displayed on the Controller Board:
To Next Page
Loading...
