Riello G20 - Securing the Burner to the Boiler

2903443
12
GB
Installation
5.6 Securing the burner to the boiler
 Put on the flange 1)(Fig. 6) the screw 2) and two nuts 3).
 It is necessary that the insulating gasket 5)(Fig. 9) is placed
between the boiler door and the burner flange.
If necessary, the insulating gasket can be modified as shown
in Fig. 7.
 Fix the flange 1) to the boiler door 4) using screws 2) and (if
necessary) the nuts 3) interposing the insulating gasket 5).
 Verify that the installed burner is lightly leaned towards the
button (Fig. 8).
Fig. 6
3
E9022
2
1
Fig. 7
D5242
Fig. 8
D5572
Fig. 9
D8058
1
2
2
5
3
4