Need help?Do you have a question about the Riello G 24 and is the answer not in the manual?
General| Fuel Type | Gas |
|---|---|
| Heat Output (max) | 24 kW |
| Burner Output | 24 kW |
| Modulation | No |
| Ignition | Electronic |
States conformity to ISO/IEC 17050-1 and lists technical standards and directives.
Lists the standard components included with the burner, such as oil-lines and flange.
Provides detailed dimensional drawings and measurements for the flange and burner assembly.
Displays a graph illustrating output versus pressure in the combustion chamber.
Explains gravity feed from below the tank, including pipe length and height considerations.
Details gravity feed from above the tank, with guidelines on pipe dimensions and limitations.
Covers suction feed systems, emphasizing sealed lines, pump limits, and return line termination.
Shows a wiring diagram for the factory-set electrical system, identifying key components.
Provides instructions for connecting wires to the terminal strip, including safety notes.
Explains how to adjust the combustion head using an adjustment bar for optimal delivery and flame.
Describes the procedure for adjusting the air damper to control air delivery.
Details the correct positioning of electrodes for ignition, referencing a specific figure.
To Next Page
