Need help?Do you have a question about the Riello MINI LN Series and is the answer not in the manual?
Details the appliance's physical components, dimensions, and connection points for different models.
Explains the internal water flow system of the appliance.
Provides a schematic of the appliance's electrical connections.
Outlines the regulations and standards that must be followed during installation.
Specifies requirements for the physical placement of the appliance.
Details the procedure and requirements for securely mounting the appliance on a wall.
Covers the safe and correct discharge of combustion gases from the appliance.
Explains how to safely connect the appliance to the electrical power supply.
Provides instructions for making secure and compliant gas connections to the appliance.
Details the steps for connecting the appliance to the water mains.
Describes the appliance's anti-freeze protection features and installation considerations.
Explains how to safely drain the water from the appliance.
Outlines the process for converting the appliance between different gas types.
Details the procedures for making necessary adjustments to the appliance settings.
Explains the layout and functions of the appliance's control panel and buttons.
Defines the meaning of various symbols displayed on the appliance's interface.
Guides users on how to navigate and activate different functions of the appliance.
Provides instructions for the initial commissioning and first use of the appliance.
Lists common error codes and procedures for resetting the appliance after a fault.
Explains how to safely turn off the appliance for short periods.
Details the steps for preparing the appliance for long-term storage.
Describes how to access and modify the appliance's internal parameters.
Provides step-by-step instructions for removing the casing on indoor models.
Details the procedure for removing the casing on outdoor models.
Explains how to reach the modulation circuit board for maintenance or repair.
To Next Page
General