To Next PageTo Next Page
Need help?Do you have a question about the Riello RS 190/E and is the answer not in the manual?
Details manufacturer declarations and compliance with standards and directives.
Declares compliance with German NOx emission limits.
Explains the importance and content of the instruction manual.
Describes hazard levels, associated risks, and warning symbols.
Details requirements upon delivery and outlines manufacturer's guarantee terms.
Introduces safety principles and potential dangers.
Emphasizes the need for qualified and trained personnel for operation.
Explains how burner models are identified and lists available models.
Classifies burners and provides key technical specifications.
Details electrical specifications for each burner model.
Shows physical dimensions and illustrates burner firing rates.
Explains firing rate adjustment by air density and test boiler usage.
Lists supplied components and provides a detailed burner breakdown.
Describes the control box functions, safety, and servomotor details.
Shows burner operation sequence and explains operator panel buttons.
Highlights critical safety instructions and handling guidelines for burner installation.
Outlines essential checks and boiler preparation steps before installation.
Instructions for positioning, securing, and adjusting the burner and its components.
Safety precautions and installation details for gas feeding and train systems.
Covers safety notes for wiring and thermal relay calibration procedures.
Crucial safety instructions and necessary adjustments before initial burner start-up.
Step-by-step guides for starting and adjusting the burner's output.
Procedures for calibrating various pressure switches on the burner.
Explains Normal mode, error displays, and accessing info/service modes.
Details accessing parameter mode, passwords, and modifying parameters.
Guides on setting modulation curves and executing the start-up procedure.
Instructions on backing up and restoring burner configuration settings.
Comprehensive list of parameters and details on steady-state operation and failures.
Crucial safety instructions and recommended maintenance schedule for the burner.
Details procedures for checking and cleaning burner components like combustion head and fan.
How to measure ionisation current and information on safety component life cycles.
Step-by-step guides on how to open and close the burner for maintenance.
A comprehensive list of error codes, diagnostic codes, meanings, and recommended measures for troubleshooting.
Lists various kits like long head, spacer, soundproofing, and gas flange kits.
Details kits for modulating operation and software/Modbus interface kits.
Lists available layout diagrams and explains reference indicators.
A key explaining symbols and abbreviations used in the electrical panel layout diagrams.
General
