Do you have a question about the Riello VOKERA VISION PLUS Series and is the answer not in the manual?
Explanation of the LCD display, icons, and button functions for operation.
Adjusting heating temperature when an outdoor sensor is connected.
How to set the domestic hot water temperature.
List of error codes, their faults, and alarm types.
Immediate actions for gas leaks and frequent system pressure loss.
Detailed explanation of boiler states: At Rest, Heating, Hot Water.
Overview of the built-in safety features ensuring safe operation.
Detailed explanation of the control panel display, icons, and button functions.
Parameters for heating temperature, hysteresis, and anti-cycle functions.
Initial steps for powering up and setting the clock.
Specific parameters for heating system control and operation.
Further parameters for heating zone control and thermoregulation.
Essential steps before initial boiler start-up.
Setting heating temperature without an outdoor sensor.
Setting heating and domestic hot water temperatures.
Checks before lighting and performing combustion analysis.
Steps for performing regular annual maintenance on the boiler.
How the boiler operates during a heating request.
How the boiler operates for domestic hot water requests.
Procedures for CO2 verification and gas valve calibration.
Detailed procedure for calibrating the gas valve.
Setting maximum heating output and configuring thermoregulation.
Comprehensive list of boiler fault codes and their causes.
Detailed wiring diagram showing component connections.
Procedure for converting the boiler from natural gas to LPG.
Important checks before starting the commissioning process and boiler setup.
Step-by-step guide for performing CO and combustion ratio checks.
Explanation of the commissioning record's importance for warranty.
Checklist for verifying installation compliance and recording data.
Fields for recording service details and engineer information.
Further sections for recording multiple service instances.
Terms and conditions for Vokèra boiler warranty coverage and registration.
Maintaining warranty through service and safety for engineers.
Situations and causes not covered by the warranty.