Rifton Wave - Preparation of the bathing and shower stretcher for use; Safety measures prior to use

4
1. Preparation of the bathing and shower stretcher for use
1.1 Delivery
On receiving the product, please check it for completeness, lack of faults and check
it for any transport damage.
Inspect the goods in the presence of your forwarder.
Should transport damage have occurred, please arrange for an inventory (deter-
mination of the faults) to be made in the presence of the forwarder. Please send a
complaint in writing to the specialist dealer responsible.
1.2 Safety measures prior to use
Correct usage of the bathing and shower stretcher requires precise and careful
training of the accompanying person. We ask you to read through the Instructions
for use carefully prior to initial commissioning of the bathing and shower stretcher,
and to observe them.
Cushioned parts may become warm when exposed to direct sunlight. Cover these
parts or protect the equipment from direct sunlight.
1.3 Safe disposal
In order to preserve and protect the environment, to prevent environmental polluti-
on and to improve the recycling of raw materials, please note the disposal instruc-
tions in points 1.3.1 and 1.3.2.
1.3.1 Packaging
The product packaging should be stored in case the product needs to be transpor-
ted again. Should you have to return the product for repairs or in case of a gua-
rantee claim, please if possible use the original box so that the product is optimally
packaged.
Separate the packaging materials for recycling according to their classication. Do
not leave packaging materials unattended, as they are a possible source of danger.
1.3.2 Product
Separate the raw materials used in the product for recycling according to their
classication (see material information under 2.1).
1.4 Where to store the Instructions for use
Please store these Instructions for use carefully and ensure that these Instructions
for use remain with the product in case of re-use.