13
Shackmaster™ Power 500 DC Power Supply Instruction Manual
First Power-Up
To prevent burnout, please pay special attention to positive and negative polarities
of electronic load during connection!
Do not use damaged equipment. Please check the housing before using the equipment.
Check whether the device has cracks or lacks plastic.
Do not operate the power supply in the environment with explosive gas, steam or dust.
Do not install alternative parts on the instrument or perform any unauthorized
modification.
We do not assume responsibility for any direct or indirect financial damage or loss
of profit that might occur when using the power supply.
Do not use the equipment on the life support system or other equipment with /
safety requirements.
CAUTION
Reduce the load if the built-in protection system displays a warning to reduce
the power consumption.
Always use dry cloth to clean the Power Supply housing.
Do not clean the inside of the instrument.
Do not block the air vent of the Power Supply.
To Next Page