28
Shackmaster™ Power 500 DC Power Supply Instruction Manual
Precautions
Do not undertake or perform any repair or adjustment of your power
supply yourself, including any attempt to change hardware.
Doing so creates a potentially fatal shock hazard and may damage the
power supply or equipment connected to it. RigExpert is not responsi-
ble for any such personal injury or equipment damage, whether caused
by accident or as a result of good faith efforts of repair or adjustment.
Make sure that devices that are to be connected to the power supply
meet its specifications, otherwise it may cause damage to the product.
Always hold the plug when plugging/unplugging the power supply.
Never unplug the power supply by pulling the cable as it may cause
fire, shock and damage to the power supply.
Do not use the power supply for devices that require high current input
at the start, such as motorized equipment and tools.
Do not charge the car battery. This may trigger the overcurrent protec-
tion circuit or even may cause damage to the power supply.
Unplug the power supply immediately if anything unusual happens,
such as smoke and or strange odors coming from it.
Contact the authorized service centers immediately for service.
Caution
To Next Page