Need help?Do you have a question about the RigExpert TI-5000 and is the answer not in the manual?
General| Brand | RigExpert |
|---|---|
| Model | TI-5000 |
| Category | Transceiver |
| Language | English |
Describes analog audio connection for digital modes, voice recording, and playback.
Explains computer control of transceiver frequency, operating mode, and other functions.
Details FSK transmission for radioteletype (RTTY) mode.
Covers transmitter control (PTT) and CW keying using external devices.
Describes using the device in voice modes with microphone and foot switch.
Details the front panel controls, indicators, and potentiometers for device operation.
Describes the various input/output ports on the rear panel of the TI-5000.
Explains using specialized cables for connecting the transceiver to the TI-5000.
Details using a standard USB A-B cable to connect the TI-5000 to a computer.
Guides through connecting the device and using the RigExpert Flash Tool.
Explains selecting update options: via Internet or from a local file.
Covers waiting for the update completion and pressing the Finish button.
Lists overall device capabilities: audio, CAT, FSK, PTT/CW, Squelch, Mic/Foot switch.
Details USB requirements, power consumption, and system compatibility.
Covers input/output amplitude, sample rate, DAC/ADC, and level control.
Details the 25-pin connector for transceiver cable and supported models.
Provides dimensions, operating temperature, weight, and warranty information.
To Next Page