To Use the Rack Mount Kit
This instrument can be installed into a standard 19 inches cabinet.
Figure 11 Rack Mount Kit
Kit Parts List
The part list of the rack mount kit (as shown in Figure 11) of DG4000 is as shown in
the table below. Wherein, the “No.” column corresponds to Figure 12 and Figure 13.
Table 1 Kit Parts List
No. Name Qty Part No. Description
1-1 Front Panel 1 RM-DG4-01
1-2 Support Board 1 RM-DG4-02
1-3 Left Plate 1 RM-DG4-03
1-4 Right Plate 1 RM-DG4-04
1-5 Pressure Feet 2 RM-DG4-05
1-6 Built-in Fitting 2 RM-DG4-06
2-1 M4 Screw 18 RM-SCREW-01 M4 x 6 Phil-Slot Pan Head Machine
Screw
2-2 M6 Screw 4 RM-SCREW-02 M6 x 20 Phil-Slot Pan Head Machine
Screw
2-3 M6 Nut 4 RM-SCREW-03 M6 x 4 Square Machine Lock Nuts
To Next Page
Loading...
