Contents RIGOL
DG800 User's Guide IX
Contents
Guaranty and Declaration ......................................................................... I
Safety Requirement ................................................................................ II
General Safety Summary ........................................................................... II
Safety Notices and Symbols ...................................................................... IV
Care and Cleaning .................................................................................... V
Environmental Considerations .................................................................... V
DG800 Series Function/Arbitrary Waveform Generator Overview ......... VI
Document Overview .............................................................................. VII
Chapter 1 Quick Start ......................................................................... 1-1
General Inspection ................................................................................ 1-2
Appearance and Dimensions ................................................................... 1-3
Front Panel Overview ............................................................................. 1-4
Rear Panel Overview .............................................................................. 1-8
To Prepare for Use ................................................................................ 1-11
To Connect to AC Power ................................................................. 1-11
Turn-on Checkout .......................................................................... 1-11
To Set the System Language ........................................................... 1-11
User Interface ...................................................................................... 1-12
To Use the Built-in Help System ............................................................. 1-15
Chapter 2 Front Panel Operations ...................................................... 2-1
To Output Basic Waveform ..................................................................... 2-2
To Select Output Channel ................................................................ 2-2
To Select Basic Waveform ................................................................ 2-3
To Set Frequency/Period .................................................................. 2-4
To Set Amplitude/High Level ............................................................ 2-5
To Set Offset/Low Level ................................................................... 2-7
To Set Start Phase .......................................................................... 2-8
To Set Duty Cycle (Square) .............................................................. 2-9
To Set Symmetry (Ramp) ................................................................ 2-10
To Set Pulse Width/Duty Cycle (Pulse) ............................................. 2-11
To Set Rising/Falling Edge (Pulse) .................................................... 2-12
To Enable Channel Output .............................................................. 2-13
Align Phase ................................................................................... 2-14
Example: To Output Sine ................................................................ 2-15
To Output the Arbitrary Waveform .......................................................... 2-17
To Enable Arbitrary Waveforms........................................................ 2-17
To Select the Waveform .................................................................. 2-17
To Set Parameters .......................................................................... 2-22
To Output Harmonic ............................................................................. 2-23
Harmonic Overview ........................................................................ 2-23
To Next Page
Loading...
