Rigol DG812 - To Select Basic Waveform

Chapter 2 Front Panel Operations RIGOL
DG800 User's Guide 2-3
To Select Basic Waveform
DG800 can output 5 basic waveforms, including Sine, Square, Ramp, Pulse and Noise.
Press Menu on the front panel, then tap the touch screen to select the desired
waveform. After selecting the desired waveform, you are automatically directed to
the waveform parameter setting interface. To go back to the waveform selection
interface, tap to slide right or press the Menu key on the front panel. At start-up,
Sine is selected by default.
Table 2-1 Basic Waveforms
Basic Waveforms
Sine
Square
Ramp
Pulse
Noise
Function Name
Sine
Square
Ramp
Pulse
Noise
Freq/Period
√
√
√
√
Ampl/HighL
√
√
√
√
√
Offset/LowL
√
√
√
√
√
Start Phase
√
√
√
√
Align Phase
√
√
√
√
Duty
√
√
Symmetry
√
Width/Duty
√
RisEdge
√
FallEdge
√