RIGOL Chapter 2 Front Panel Operations
2-104 DG800 User's Guide
2) Install the option by sending SCPI Commands
Open the remote control window and send the following option installation
commands by referring to "Remote Control
".
:LICense:SET <license>
or :LICense:INSTall <license>
Wherein, <license>
is the option license (note that the hyphens should be
omitted).
For example, :LICense:INSTall
0A485CC695F5A7EC1116D598FF5F4DFFF7D3359266C6A400DA3DE9A5EE
6F58758BC25E0FA8CAC3D115D3267C419A3496E80629FAA2E8FA632D19
2E344B1285BB
If the option has been successfully installed, a prompt message will be
displayed; otherwise, a message indicating a failed installation will be
displayed.
To Next Page
Loading...
