RIGOL Chapter 1 Quick Guide
1-10 DG800 User's Guide
screen can also be saved to the USB storage device in the format of an
image (*.Bmp).
TMC DS: seamlessly interconnects with the RIGOL DS that meets the TMC
standard. Reads and stores the waveform data collected by the DS and
rebuilds waveforms without distortion.
USB-GPIB interface converter (optional accessory): extends the GPIB
interface for RIGOL instruments that integrates the USB HOST interface
but not the GPIB interface.
5. USB DEVICE
It is used to connect the generator to a computer which can control the
generator remotely by using PC software or by programming.
6. AC Power Cord Connector
The rated AC power source supported by the signal generator is (100-127 V,
45-440 Hz) or (100-240 V, 45-65 Hz), and its maximum input power shall not
exceed 30 W. The specification of the fuse is 250 Vac, T4.0 A.
To Next Page
Loading...
