Rigol DP832A Programming Guide

RIGOL Chapter 2 Command System
2-38 DP800 Programming Guide
:PRESet:KEY
Syntax :PRESet:KEY {DEFAULT|USER1|USER2|USER3|USER4}
:PRESet:KEY?
Description
Define the setting recalled by Preset at the front panel.
Query the setting recalled by Preset at the front panel.
Parameter
Name Type Range Default
{DEFAULT|USER1|USER2|
USER3|USER4}
Discrete
DEFAULT|USER1|USER2|
USER3|USER4
DEFAULT
Explanation  DP800 supports to restore the instrument to default state or user-preset state
(up to 4 kinds).
 After sending this command to set the instrument, sending the
:PRESet[:APPLy]
command or pressing Preset at the front panel can restore the instrument to
the default value or user-preset value.
 When user-preset state is selected, you can use the :PRESet:USER:SET series
commands to set the parameters of the user-preset state currently selected.
Return Format The query returns DEFAULT, USER1, USER2, USER3 or USER4.
Example :PRES:KEY USER1
:PRES:KEY?
Related
Command
:PRESet Commands

Rigol DP832A Specifications

General

Brand	Rigol
Model	DP832A
Category	Power Supply
Language	English