Chemical Vapors: Heating of solder can generate toxic vapors
and vapors with high volatile organic compounds (VOCs).
Hot Surfaces: Circuits and soldering equipment generate heat.
Such surfaces must be guarded and labeling must warn users of
the hazards.
Mechanical Hazards: Moving parts must be guarded to prevent
accidental contact. Guards must never be bypassed.
Electrical: Contact with energized parts can lead to injury or
even death. Before each use, inspect for any damaged wiring
and safeguards. Do not use if problems are found. Ensure the
oscilloscope is properly grounded and plugged directly into an
outlet.
HEALTH & SAFETY INFO
02
To Next Page
Loading...
