Rigol DSA1000 Series - Page 11

RIGOL
DSA1000&DSA1000A Options&Accessories
9
6. C/N Ratio
Measures the power of both the carrier and the noise within specified bandwidth
and calculates their ratio.
7. Harmo Dist (Harmonic Distortion)
Measures each order harmonic power and THD (Total Harmonic Distortion) of
carrier. The available range is up to 10 orders. And the fundamental wave
amplitude of the carrier must be higher than -50 dBm or else the measurement
will be invalid.
Noise BW
Offset Freq
Carrier BW